Cable connecting transceiver to RigExpert.
Sold separately .
Necessary for:
1.RigExpert TI5
2.
RigExpert Plus
3.
RigExpert Standard

MixW software manual
Connect RigExpert modem
to transceiver
and PC
What`s new :
For AA230PRO:
1. Input transistor, prevent static.
2. top fq range 230 MHz
3. Add microchip 16 bit analogue-digital transformer
which made more accurate and stable measurement.
4. SWR measure can do it for 25 / 50 / 75 / 100 Ohm
5. Add to device test coax lines – Time Domain Reflectometer (TDR).
6. Install new LCD with white light which increase time use battery.
7. PSU changed, now can used device even in charge condition.
8. Add measure and display battery condition.
For AA230
What`s new:
1. Input transistor, prevent static.
2. top fq range 230 MHz
3. Add microchip 12 bit analogue-digital transformer
4. SWR measure can do it for 25 / 50 / 75 /100 Ohm
5. Install new LCD with white light which increase time use battery.
6. PSU changed , now can used device even in charge condition.
7. Add measure and display battery condition.
For AA-520
What`s new:
1. Input transistor, prevent static.
2. top fq range 520 MHz
3. Add microchip 16 bit analogue-digital transformer
4. SWR measure can do it for 50 Ohm
5. Install new LCD with white light which increase time use battery.
6. PSU changed , now can used device even in charge condition.
7. Add measure and display battery condition.
Comparison table of antenna analyzer model functionality |
|||
function/model |
|||
Frequency range |
0.3-230 MHz |
0.3-230 MHz |
1-520 MHz |
Frequency entry step size |
1 kHz |
1 kHz |
1 kHz |
Min. sweep range |
10 kHz |
10 kHz |
100 kHz |
SWR2AIR™ mode |
+ |
+ |
- |
Reactance sign measurement |
+ |
+ |
- |
Connector type |
UHF (PL) |
UHF (PL) |
N |
Output power |
+10 dBm |
+10 dBm |
+5 dBm |
Output amplifier |
Transistor stage with additional protection |
Transistor stage with additional protection |
Transistor stage with additional protection |
Reference impedance for SWR measurement |
25, 50, 75, 100 Ohm |
25, 50, 75, 100 Ohm |
50 Ohm |
Analog-to-digital converter |
12-bit |
16-bit |
16-bit |
Battery voltage sensor |
+ |
+ |
+ |
Operation with external power supply (without battery) |
+ |
+ |
+ |
LCD backlit |
White, ultra-bright LEDs |
White, ultra-bright LEDs |
White, ultra-bright LEDs |
Time Domain Reflectometer mode |
Only with AntScope software on the PC |
Built-in |
- |
Functionality of RigExpert modems |
|||||||||||
interface \ function
|
any soft
|
CAT
|
PTT |
PTT
in |
CW
|
CW keyer
|
FSK
|
AudioFSK
|
Use PC Sound Card |
digital microphone |
need TRCVR cable |
RigExpert TI5
|
+
|
+
|
+
|
+ |
+
|
+
|
+
|
+
|
-
|
+ |
+
|
RigExpert Plus
|
+
|
+
|
+
|
- |
+
|
+
|
+
|
+
|
-
|
- |
+
|
RigExpert Standard
|
+ |
+ |
+ |
- |
+ |
- |
+ |
+ |
- |
- |
+ |
RigExpert Tiny |
+ |
+ |
+ |
- |
+ |
- |
- |
+ |
+ |
- |
- |
RigExpert Standard is a simplified and slightly modified
version of RigExpert Plus. WinKey keyer as well as optical I/O
connectors are removed. Instead, an additional DB9 socket is added to
provide a separate COM port for connecting antenna rotors, TNCs or other
serial devices. This is what most digital mode enthusiasts need.
All other important parts (CAT, PTT/CW and FSK ports, USB audio codec,
volume controls) are preserved.
The pinout of the 25-pin connector is still the same.