Product description

RigExpert AA-200 is a powerful antenna analyzer designed for testing, checking, tuning or repairing antennas and antenna-feeder paths in 0.1 to 200 MHz range.

Graphical SWR (Standing Wave Ratio) and impedance display is a key feature of this analyzer which significantly reduces time required to put an antenna to rights.

Easy-to use measurement modes, as well as additional features such as memory storage and connection to a personal computer, make it attractive for professionals and hobbyists.

The following tasks are well-accomplished by using RigExpert AA-200:

•  Rapid check-out of an antenna
•  Tuning an antenna to resonance
•  Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
•  Making coaxial lines or measuring their length
•  Cable fault location
•  Measuring capacitance or inductance of reactive loads

KMK UK Limited
Home
Products
Download
Last stock
Order on line
Tune
APRS
Cable Diagram
Buy in Europe
Review

1. Antenna connector
2. LCD (Liquid Crystal Display)
3. Keypad
4. Charger connector (9-14V DC)
5. Power button
6. USB connecto
r

Specifications

Frequency range: 0.1…200 MHz
Display modes:

SWR at single frequency
SWR, R, X, Z, L, C at single frequency
SWR graph
R, X graph

Single-frequency measurement:

•  Frequency resolution: 1 kHz
•  SWR only mode: easily-readable bar
•  SWR range: 1…10
•  SWR display for 50 and 75 Ohm systems
•  R, X range: 0…1000, -1000…1000 Ohm

SWR and R, X graphs:

•  100 points plot
•  Sweep width: 0.001…200 MHz
•  Frequency resolution: 1 kHz
•  SWR range: 1…10
•  SWR display for 50 and 75 Ohm systems
•  R, X range: 0…200, -200…200 Ohm
•  100 memories to store and recall graphs
•  Presets for radio amateur bands

RF output:

•  Connector type: UHF
•  Power: 15 dBm typical
•  Impedance: 50 Ohm

Power:

•  4.8V, 1800 mA · h, Ni-MH accumulator
•  Max. 3 hours of continuous measurement
•  Max. 3 days in stand-by mode
•  External 9…14V, 200 mA charger
•  Full charge time: 10…12 hours

Interface:
•  128x64 graphical LCD with backlit
•  6x3 keys on the water-proof keypad
•  Multi-lingual menus and help screens
•  USB connection to a personal computer

Dimensions: 23x10x5.5 cm (9x4x2 in)
Operating temperature: 0…40 ° C (32…104 ° F)
Weight: 650g ( 23 Oz )

We have introducing to NEW product :
PROFESSIONAL ANTENNA ANALYZER till 200MHz
for price HAM radio

AA-200

Hello Konstantin,

The small parcel with the AA-200 arrived today, thanks.
This is EXACTLY the tool I need to my fixed and portable (+car) antennas. Most of the time I would like to adjust the antenna for best SWR for a specific fq or interval. Whith this tools is an easy thing. The RF signal is a very nice feature ... Let me also tell you that I'm using an AIM-4170 to analyze my antennas. This is also a great product. These two analyzers complement each other very fine. But it's diffucult to always bring the PC for AIM-4170 measurements in the deep forest .. http://ndl-dx.se/20060605/    (we was there during 2007 too incl. my Buddipole).

So my first impression is EXCELLENT.

Very Best Regards,

Lennart SE5X

VP6DX Ducie Island 2008

Review in RSGB magazine
RadCom


eHAM review