RigExpert AA-230PRO is a powerful antenna analyzer designed for testing, checking, tuning or repairing antennas and antenna-feeder paths in 0.3 to 230 MHz range.
Graphical SWR (Standing Wave Ratio) and impedance display is a key feature of this analyzer which significantly reduces time required to put an antenna to rights.
Easy-to use measurement modes, as well as additional features such as memory storage and connection to a personal computer, make it attractive for professionals and hobbyists.
The following tasks are well-accomplished by using RigExpert AA-230PRO:
• Rapid check-out of an antenna
• Tuning an antenna to resonance
• Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
• Making coaxial lines or measuring their length
• Cable fault location (TDR)
• Measuring capacitance or inductance of reactive loads
We have introducing to NEW product :
PROFESSIONAL ANTENNA ANALYZER 0.3-230MHz
for price HAM radio
AA-230PRO
Frequency range: AA-230PRO: 0.3…230 MHz
Display modes:
• SWR at single or multiple frequencies
• SWR, R, X, Z, L, C at single frequency
• SWR graph
• R, X graph
• AA-230PRO: Impulse response and step response graphs
Single- and multi-frequency measurement:
• Frequency resolution: 1 kHz
• SWR-only mode: easily-readable bar
• SWR range: 1…10
• SWR display for: AA-230PRO: 25, 50, 75 and 100 Ohm systems
• R, X range: AA-230PRO: 0…1000, -1000…1000 OhmSWR and R, X graphs:
• 100 points plot
• Sweep width: AA-230PRO: 0.01…230 MHz
• Frequency resolution: 1 kHz
• SWR range: 1…10
• SWR display for: AA-230, AA-230PRO: 25, 50, 75 and 100 Ohm systems; AA-520: 50 Ohm systems
• R, X range:AA-230PRO: 0…200, -200…200 Ohm
• Memories:AA-230PRO: 90 memories to store and recall graphs
• Presets for radio amateur bands
Time domain reflectometer mode (AA-230PRO only):
• 100 points plot
• Measurement for 25, 50, 75 and 100 Ohm systems
• Resolution: about 20 cm ( 8” )
• Max. distance: about 300 m ( 1000 ft )
• Cable velocity factor: 0.5 to 1
• 10 memories to store and recall graphs
RF output:
• Connector type: AA-230PRO: UHF (PL)
• Output power: AA-230PRO: typ. + 10 dBm;
Power:
• 4.8V, 1800 mA · h, Ni-MH battery
• Max. 3 hours of continuous measurement
• Max. 2 days in stand-by mode
• External 9…14V, 500 mA charger
• Full charge time: 10…12 hours
Interface:
• 128x64 graphical LCD with backlit
• 6x3 keys on the water-proof keypad
• Multilingual menus and help screens
• USB connection to the personal computer
Dimensions: 23 x 10 x 5.5 cm (9 x 4 x 2”); Operating temperature: 0…40 °C (32…104 °F)
Weight: 650g ( 23 Oz )