RigExpert AA-54 are powerful antenna analyzers designed for testing,
checking, tuning or repairing antennas and antenna feedlines.
Graphical SWR (Standing Wave Ratio) and impedance display are key features of these analyzers which significantly reduce the time required to adjust an antenna. Easy-to use measurement modes, as well
as additional features such as connection to a personal computer (to plot Smith
diagrams, etc.), make RigExpert AA-54 attractive for professionals and hobbyists.
The following tasks are easily accomplished by using these analyzers:
• Rapid check-out of an antenna
• Tuning an antenna to resonance
• Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
• Making coaxial stubs or measuring their parameters
• Cable fault location
• Measuring capacitance or inductance of reactive loads

Specification AA-54

Frequency range: AA-30: 0.1 to 30 MHz, AA-54: 0.1 to 54 MHz
Frequency entry: 1 kHz resolution
SWR measurement range: 1 to 10
SWR measurement for 50 and 75-Ohm systems
SWR display: numerical or easily-readable bar
R and X range: 0…1000, -1000…1000 in numerical mode,
0…200, -200…200 in graph mode
Display modes:
- SWR at single or multiple (AA-54 only) frequencies
- SWR, R, X, Z, L, C at single frequency
- SWR graph, 100 points
- R, X graph, 100 points
RF output:
- Connector type: UHF (SO-239)
- Output signal shape: rectangular, 0.1…10 MHz (AA-30) or
0.1…10.8 MHz (AA-54). For higher frequencies, third or fifth (AA-
54) harmonics are used.
- Output power: about + 13 dBm (at 50 Ohm load)
Power:
- Two 1.5V, alcaline batteries, type AA *
- Two 1.2V, 1800…2700 mA·h, Ni-MH batteries, type AA *
- Max. 3 hours of continuous measurement, max. 2 days in stand-by
mode when fully charged batteries are used
- When the analyzer is connected to a PC or a DC adapter with USB
socket, it takes power from these sources
Interface:
- 133x64 graphical backlit LCD
- 6x3 keys on the water-proof keypad
- AA-54: multilingual menus and help screens, AA-30: menus and
help screens in English language
- USB connection to a personal computer
Dimensions: 22·10·3.6 cm (9·4·1.5”);
Operating temperature: 0…40 °C (32…104 °F)
Weight (including batteries): 400g (14 Oz)
Batteries are not included with the analyzer. Users can purchase these batteries with
a corresponding charging adapter.